Need help with your
lil SOLID 2.0?

Using lil SOLID 2.0

Using lil SOLID 2.0 is just that simple. See for yourself.

First slide the cover open and insert a Fiit tobacco stick with the tobacco side into the device. Press for 2 seconds and feel it come to life with a vibration. The device will pre-heat for up to 25 seconds. When the pre-heating process comes to an end, the light comes on, it vibrates again and is ready to be used. Each experience lasts up to 5 mins or 14 puffs, whichever comes first. The device vibrates and blinks to signal the last 3 puffs or 30 seconds, whichever comes first. Twist the tobacco stick more than 3 times in the same direction, remove the heat stick and close the cover.

That's it. Your device is ready for another use if you want it.

Simple.

Cleaning your lil SOLID 2.0

Cleaning your lil SOLID 2.0 is just that simple.

Always turn off your device before you do it.

1. Open the cleaning wiper from the dual cleaner

2. Pull off the cap from the device

3. Use the cleaning wiper to clean the heating pin

4. Open the cleaning brush from the dual heater

5. Use the cleaning brush to clean the inside

For an optimal experience, clean after every 20 uses. You can also clean with heat. Quickly press the start button 5 times. The LED light will blink orange for 90 seconds. When the cleaning is done, the light goes off and you will feel it vibrate twice.

Simple.